question

stacey avatar image
stacey asked

My mppt 100/30 smart controller pairs but does not show up on device list. Restarted my phone, uninstalled and reinstalled my app and unpaired and repaired my device. I don't know what else to try.

The list change when pairing but the device does not show when the app searches for it.

smart solar set-up help
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Paul B avatar image
Paul B answered ·

Make sure your phone is connected to the internet when you are connecting to the smartsolar MPPT unit as a update maybe required.


please also unpair the unit reboot your phone


Then open the Victron connect app (the unit will auto pair so dont pair it first), if a update is asked for please update, it may ask to update two times


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi Stacy,

Have you tried the VictronConnect Troubleshooting guide?

https://www.victronenergy.com/live/victronconnect:start#troubleshooting

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic