I have 4 SOK 12v 206ah batteries going into a 24v 412ah configuration to a Victron MP 3kw/24v
The SOKs have in-built BMS and have been sitting unused (in their shipping boxes) since late last year when I ordered them.
The voltage for each individual 12v battery is currently ~13.07 (two are at .07, one is .06 and one .08).
My question is what would be the best approach to do the initial load top balance? Should I use a bench charger device to bring each one up to proper voltage separately or will the Victron MP do the initial top balance correction even if they are in their ultimate 24v configuration? If the Victron MP will take care of it, are there settings I need to adjust from default for this to occur?