Inverter Temperature on VRM "Monitoring "

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

fadi-lab asked Jun 23, '22

Hello, Why we cant monitor on VRM the internal Temperature of the Inverters and solar chargers?

Please Add this Option by Victron designers.

It's very Useful

All The Best

Temperature Sensor

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2022-08-14T12:29:55Z

Alexandra answered · Aug 14, 2022 at 12:29 PM

You can use the temperature sensor for the inverter and place it n the inverter and view it on the VRM

2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

michael66 commented · Nov 13, 2022 at 08:26 AM

But that means you have to open the Multiplus and know the spot were to expect the highest temperatur? Wouldn't that void the warranty?

0 ·

Alexandra ♦ michael66 commented · Nov 13, 2022 at 10:05 AM

@Michael66

No.

Do understand though if you break something while doing so, it is not covered by warranty. (Since it is now not a manufacturer defect).

And just above the heat sink makes sense. There is will be the hottest.

0 ·