question

PeterM avatar image
PeterM asked

Alarm not clearing on Venus

Just noticed that that my Venus GX is reporting 2 alarms on remote console ( Both Midpoint BMV voltage alarms ) which are no longer present on the BMV itself or the VRM. How does one clear them now. BMV and Venus on latest current firmware

BMV Battery MonitorVenus GX - VGX
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

4 Answers
wkirby avatar image
wkirby answered ·

So if you are on the "Device list" screen and go down to "Notifications" then you should see your alarms there. If you highlight them and press space bar to acknowledge them.
Then the flashing triangle at the top bar should clear.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

alans avatar image
alans answered ·

This does not work for me. Still annoyed.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

p0lar avatar image
p0lar answered ·

Same here. Space or middle button is not clearing them

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

schwuppe avatar image
schwuppe answered ·

is there a solution?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.