question

sweyn avatar image
sweyn asked

VE Bus Mains detector for Multiplus 12/800/35

Do I need a Mains detector with a Multiplus 12/800/35?

I have a Lynx Smart BMS and CerboGX.

This question has been asked before, but no answers that I can see.

multiplus ve.bus
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

Hi @Sweyn,

No need for the Mains detector (it's part of the VE.Bus BMS) for your system.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

sweyn avatar image
sweyn answered ·

Thanks again Stefanie. I’d found a reference saying that the Multiplus 2 had a built in mains detector, but no reference to the other multipluses or other parts of the system.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Stefanie (Victron Energy Staff) avatar image Stefanie (Victron Energy Staff) ♦♦ commented ·
You're welcome.

Even if the MultiPlus-II has a built-in mains detector, this would only help with a VE.Bus BMS. But since you have a Lynx Smart BMS, it does not come into play.

1 Like 1 ·

Related Resources

Additional resources still need to be added for this topic