question

PeterM avatar image
PeterM asked

Enable SOC on VE Config3 or not

I'm a bit confused what the Settings "Enable SOC " on VEConfig 3 does if you have a BMV and Venus GX settings set to "Syncronize VE Bus SOC with Battery set to ON " Is it recommended to still have the VEConfig settings set to enable monitor or not ? No assistants running , Multiplus in Backup UPS Mode?

MultiPlus Quattro Inverter ChargerBMV Battery MonitorVenus GX - VGX
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

You may not notice any operational difference in your situation.

The recommended setting for the most functionality is Enable SOC in VEConfig, and synchronise VE Bus SOC on the GX.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.