question

Henk avatar image
Henk asked

Ignore AC input VS function

I am trying to use the Ignore AC input Virtual Switch function.

2 Kva Multi Radio Button set to "Ignore AC Input VS".

Setting: >1200W VS = On; <600W = Off


When the load increases to >1200W the multi does not Switch to the grid.

Please advise what methodology can this be used.

The primary function is to only use the grid when the load is higher.

henk@pasma.com.au

MultiPlus Quattro Inverter Charger
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Henk avatar image Henk commented ·

Not sure how to send screenshots on this forum, however if you can advise email address I can send a copy of the vsc file or screenshots.

Regards henk@pasma.com.au

0 Likes 0 ·
boekel avatar image boekel ♦ Henk commented ·

screenshots are very easy, just drag&drop them into the text. But please do crop / resize if needed.

0 Likes 0 ·
4 Answers
Henk avatar image
Henk answered ·

Screenshots.



screenshot-2019-04-05-172412.png (98.2 KiB)
screenshot-2019-04-05-172416.png (136.5 KiB)
screenshot-2019-04-05-172421.png (124.1 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

boekel avatar image boekel ♦ commented ·

Have you got it working now? or still unexpected results?

I'm not sure how the 'when no 'VS ON' conditions apply' setting behaves together with the other conditions.

0 Likes 0 ·
boekel avatar image
boekel answered ·

I think you've got it backwards, VS=on means it will ignore AC input
Can you make screenshots of all the VS settings?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Henk avatar image
Henk answered ·

I have the VS inverted "unticked"

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Henk avatar image
Henk answered ·

Issue now resolved.

I have turned ON "Weak AC"

Seems the power supply in this area is not only Low Voltage but possibly requires the weak ac function selected.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.