question

miya avatar image
miya asked

Multiplus-II & Lynx Smart BMS - Remote Control Multiplus Switch

Hi All

Currently have an Easyplus 1600 and VE.Bus BMS. I know I cannot control the Easyplus Switch status via VRM Remote Console - as I see the message below - as the state is controlled by the VE.Bus.

remote-console-via-vrm.png


I am upgrading to Multiplus-II & Lynx Smart BMS.

Will I be able to control the Multiplus-II Switch state via the VRM Remote Console and Cerbox GX Touch ?

Thanks all,

Tim

Multiplus-IIVRMremote console
remote-console-via-vrm.png (111.5 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

Hi @Miya,

Yes, you can control the MultiPlus state (On/Off, Inverter only, Charger only) from the GX device and VRM remote console with the Lynx Smart BMS.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

miya avatar image miya commented ·
Great - thank you so much Stafanie
0 Likes 0 ·