question

m-richards avatar image
m-richards asked

MPPT 150/60 Name not updating in Touch 50

Hi,

I have a Cerbo GX with Touch 50, a MPPT 150/60 and a MPPT VE.Can 150/85 rev2.

Changing the name of the 150/85 as well as all of the other devices in the system (inverter, smart shunt, etc.) updates the name displayed on the Touch 50 and in VRM. The 150/60 just displays as "MPPT-278". Is this as expected?

I see the 150/85 is a CAN enabled device, perhaps that's the difference?


Thanks,

MPPT Controllers
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·
@M_Richards

How is it connected? I have seen on ve direct that happens.

0 Likes 0 ·
1 Answer
m-richards avatar image
m-richards answered ·

Yes, it is VE.direct

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.