question

rikhf avatar image
rikhf asked

ET340 Use with 1 MP2, 1 SMA PV-> AC inv. and 1 MPP solar hybrid AC out

Hello all,

I've been reading around here but can't find a proper answer. At home I have an hybrid MPP Solar inverter which runs on phase 2. Now I've added a MP2 on phase 1 and on the output of it I want to connect an ac pv inverter. I found out how to connect the ET340 to measure both. Now I want to measure the ac out from the hybrid inverter on the third connection of the ET340. Can I do that? Or more important, can I configure it in the Cerbo GX so I can see what the hybrid is doing on the Victron system?

Greetings, Rik

Energy Meter
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
rikhf avatar image
rikhf answered ·

Can no one answer this question?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources