Split RJ45 connector on multiplus?

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

Carl asked Jun 3, '22

Is it possible to use a RJ45 connector splitter on the multiplus?

Its 2 RJ45 connector on my multiplus.

one is connected to Lynx Smart BMS and the another one is connected to the remote control.

I would like to also connect my MK3-USB between the multiplus and my cerbo gx.

is there any way to do that?

cerbo gx multiplus ve.bus MK3

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany ♦♦ commented · Jun 03, 2022 at 07:36 PM

One of the requirements for the MK3 is that nothing else is connected to the multiplus.

0 ·

Answer 1 · 2022-06-03T13:10:24Z

Matthias Lange - DE answered · Jun 03, 2022 at 01:10 PM

The Lynx Smart BMS is VE.Can not VE.Bus, you can't connect the BMS to the Multi.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.