I've got everything set up properly insofar as I can tell for three-battery bank:
- Everything's connected tight;
- I do have power flowing through the shunt, a complete circuit;
- The fuses in the red wires are intact;
- I've got the red wires hooked up to the positive terminal on the first two batteries;
- I even ordered a replacement unit from Amazon, just in case the first one was defective.
But nope; I hit the on switch, power flows through the circuit, and the readout remains blank and I see no Bluetooth. Is there further troubleshooting to be done, or should I assume that the 712's not gonna work with my setup?