question

jonaaal avatar image
jonaaal asked

Monitoring of non-PV DC generation through CCGX

This has been mooted as a possible new feature for some time. Is there any prospect soon? I have three systems that could do with this, or a better work around than the 'Has DC System' fudge.

@Guy Stewart (Victron Community Manager)

@Daniël Boekel (Victron Energy Staff)

@Oekosven

@48V on 56North

@Chase Martin

@Sam Salwei

Any news gratefully received!

Similar posts:

https://community.victronenergy.com/questions/46329/integrate-a-2000w-48v-dc-wind-turbine-into-the-vic.html

https://community.victronenergy.com/questions/51762/two-dc-inputs-on-ccgx.html

feature requestmonitoringNew Productsdc meter
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

Yes, the SmartShunt and BMV can be configured to act as a DC Energy Meter. It is documented in this chapter - https://www.victronenergy.com/media/pg/CCGX/en/installation.html#UUID-d0c1e103-df9e-4691-b369-33d047b01491

Also, please be considerate and not @ people in the first place, try to imagine being the recipient of those and you have made quite a long list there. It's not very nice to be singled out like that.
Asking the question and allowing a member of the community to answer is adequate enough.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

The feature requests topic tag can help Victron R&D find feature suggestions for products. 

There are many factors that go into the Victron product roadmap, and feedback from end-users can help.