This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
...
would like to understand in detail how to record all the data of my new smartsolar and smartshuunt over time. And how to use the VRM portal.
IN the switch between Epever to victronenergy system I have lost the ability to record data. I used to record up to 30,000 records every 10 minutes for 4 months with an Epever accessory costing $ 20. Epever E-log.
to record on the VRM you will need a Cerbo GX or Venus GX or CCGX one of these then connects all your other victron units to the free VRM
edit.
Take a look at my installation. (I think this works?).
Epever sell for 20 euros the accessory to record data and for 30 euros the wifi module that can connect to their cloud internet system with a normal router.
It exists some similar in victronenergy to use VRM with a standard router? If not, I will give up the data record function for the moment. Shame.
There is also the option to run Venus on a Raspberry Pi. This will have the same function as a Cerbo, Venus or CCGX, but its cheaper and ideal for small systems like yours. Maybe if you already have a Raspberry Pi then it will be no cost.
https://www.victronenergy.com/blog/2017/09/06/raspberry-pi-running-victrons-venus-firmware/
