PV module temperature

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

PeterM asked Apr 1, '19

I would like to interface a temperature sensor to my PV modules and the Venus GX. What are the specs for the sensor to work -

Venus GX - VGX Temperature Sensor

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2019-04-01T21:25:29Z

Murray van Graan answered · Apr 01, 2019 at 09:25 PM

Just add the Victron temp sensor with part number ASS000001000 to the temp input on your Venus device. I have done this before and it works just fine

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2019-04-02T15:46:04Z

PeterM answered · Apr 02, 2019 at 03:46 PM

The victron sensor is a big bulker cable lug , not elegant to glue to the underside of a PV Module

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.