This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi all! I connected my laptop to the inverter and configured all the parameters for my system and battery type/capacity. However, connecting to the inverter via the Victron Connect app shows that the charge limit is set to 50a. When I try to increase this to 70a in the VC settings, it wont let me go above 50a. What am I missing here? How do I allow the system to fully utilize the 70a that the charger is able to handle?
I had this same problem. I realized my battery was not set up in VE Configure for my Multiplus so I downloaded the file, edited the battery settings and also unchecked Weak AC. Uploaded it again and ran the system and it then charged with amperage up to 70amps instead of 50amps.
Hope this helps!
