Hi, has anyone experienced the ve.direct pins pulling out? I have a smartshunt that I used on my boat for about a year, didn’t have anything connected to the ve.direct port until recently when I added a cerbo gx and the gx touch 70. Plugged the cable to interface the two but not liking the layout (used a 90° cable on one end and straight on the other) I pulled out the connector out of the smartshunt and didn’t notice that it pulled out a pin, which then I tried to connect to the cerbo and it nearly wrecked the connector on the cerbo.
I strongly feel Victron should be offering blanking plugs like many other manufacturers use for when those ports aren’t in use, to protect them from corrosion.
