question

philv avatar image
philv asked

Hi I have a mppt smart solar and a smart battery sense, so do I have to manually set the temperature compensation or will the mppt do this automatically if I set the values for my batteries at 25c?

MPPT ControllersTemperature Sensortemperature compensation
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
klim8skeptic avatar image
klim8skeptic answered ·

Perhaps you could mention your battery make / type?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

philv avatar image
philv answered ·

I have rolls AGM batteries in 24v

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image klim8skeptic ♦ commented ·

You are lucky, Rolls have a very good User Manual.

Page 25 gives Bulk/absorb and float voltages, as well as the temp compensation figure of 4mV / °C / Cell. -24mV for a 12v battery, -48mV for a 24v battery

You will have to change the temp compensation figure in the mppt, as Victron use the figure of -16mV.

Mppt manual, Follow the instructions.

0 Likes 0 ·
philv avatar image philv klim8skeptic ♦ commented ·
Thanks

0 Likes 0 ·

Related Resources

Victron temperature sensor disambiguation table - which product supports which sensor


MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual

Additional resources still need to be added for this topic