question

northstar avatar image
northstar asked

How and where do I publish the keepalive to ?

Hi all,

I´m successfully connected but don´t see any topics.
How and where to do I publish the keepalive in MQTT-Explorer ?

19-mqtt-explorer-connected.jpg

Thanks,

Sven

MQTT
19-mqtt-explorer-connected.jpg (51.4 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
northstar avatar image
northstar answered ·

I already tried with the VRM portal webpage open (it supposed to send keepalives to the cerbo) but still no change, mmh. I don´t get that dropdown little triangle as with test.mosquitto.org, like below.

20-mqtt-explorer-connected-test-mosquitto.jpg



20-mqtt-explorer-connected-test-mosquitto.jpg (60.0 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

pierrehassolar avatar image
pierrehassolar answered ·

Subscribe to # also

Then send message to online VRM id, one of the id's will be your local.

R/ID/keepalive

R/f045ea7bkb78/keepalive with no values

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

northstar avatar image
northstar answered ·

Thanks Pierre,

this is fine now !

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Victron MQTT readme