Measurement frequency / MPII

Hi,

i just look for a way to lower the measurement delay und increase the measurement frequency. (Measurement of AC Input / Output and DC) Are there any options for? In direct comparisation with other systems (in my case e3dc), the delay and frequency are for me very bad. Currently i fetch the data with MQTT over venus os. Are there better ways?

Greetings, han

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

shaneyake commented · May 11, 2022 at 03:12 AM

What is the measurement frequency you are getting now? You can't really go faster than 1hz and most of the time it is 0.2hz.

0 ·

hanes1 shaneyake commented · May 11, 2022 at 05:47 PM

Not all values are updated at same frequency, but all between your given frequency.

The delay is about 5 to 10 secs (depending on frequency from 1hz to 0.2hz), so lets say there is a minimum of 5 seconds delay. Thats a long time i think.

0 ·