question

Michael Scholze avatar image
Michael Scholze asked

How to set the battery voltage where PV Inverter Support Assistant starts rising frequency

I'm using a Multiplus II offgrid setup with cerbo gx and pylontech batteries and want to add a Fronius Symo to AC-OUT 1. Pylontech has a absorbtion at 51V and float at 52V. According documentation of the assistant (https://www.victronenergy.com/live/assistants:pv-inverter-support) the assistant will start rising frequency at 54V. With this configuration it will never rise frequency for Pylontech batteries.

How can I reduce the voltage at which the PV Inverter Support Assistant will increase the frequency appropriately for Pylontech batteries as well?

Is it possible to configure via DVCC?

Multiplus-IIPylontechAC PV CouplingAssistants
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Rob Duthie avatar image
Rob Duthie answered ·

Yes it is

Regards

Rob D

NZ

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.