Hello. I have my victron 75/10 solar controller connected to 18 Watts of LED lights. I have set the lights to be dimmed at 50% at sunset, however they come on at full brightness. Does anyone know what might be wrong?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello. I have my victron 75/10 solar controller connected to 18 Watts of LED lights. I have set the lights to be dimmed at 50% at sunset, however they come on at full brightness. Does anyone know what might be wrong?
I had the same issue with my 75\15. Apparently, in order to use the dim feature, the VE Direct TX digital output cable and a PWM LED driver are required.
I purchased a 12V single channel inline PWM LED dimmer controller(~$10). I then changed my 75/15 settings to simply turn the load output on at sunset(without dimming), then adjusted the external dimmer to the desired light level.
Additional resources still need to be added for this topic
29 People are following this question.