Hello,
I installed my BMV712 a few days ago, everything works fine but I would like to ask for a few details:
Counted charge cycles:
According to the user manual, a charge cycle is only counted, if the batteries are discharged to 65% and charged back to >90%.
The deepest discharge of my 24V/1200Ah lead acid battery bank is usually limited to 70% - so do I never get a counted charge cycle? Or can I change the conditions what a charge cycle should be in my system?
Automatic synchronisation:
Is an auto synchronisation only counted, if the three conditions (battery voltage, tail current and duration) are met and the SoC does not already show 100%?
My system already had discharges and was charged up to 100% (the 3 conditions were obviously met a bit later - according to VRM), but the auto synch counter is still 0.
Maybe it counts only if the SoC jumps from a deeper SoC level to 100%?
Thank you & best regards
Rainer