question

adco avatar image
adco asked

Grid feed disabled but i still see feed values in VRM

Hello,

I have 2x EasySolars 24/3000 (basicaly Multipluses) configured in parallel.

Probles is I have disabled Grid Feed In from ESS but in the VRM i still see e.g. -90w (oscilates up to even -300w when heavi load).

What am I missing? I do not want to feed in and I know that small W is ok but not that high.

Any ideeas?

screenshot-20220501-204145-vrm.jpg

ESSVRMmultiplus in parallel
screenshot-20220501-204145-vrm.jpg (186.7 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul B avatar image
Paul B answered ·

raise the grid set point to say 100w or as low as you can get to reduce the feed in issue.

I never see a feed in when I have a small positive grit set point set.

I am on the latest fw for all items cerbo 2.85 multi 496

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

adco avatar image adco commented ·
Thanks Paul!

Seems that rising to 100w works. I had it with 0 and 50w but as you mentioned with 100w now I see just pozitive values no more negative.

Thanks again!

0 Likes 0 ·