Victron multiplus ii and mppt

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

matt1309 asked Apr 29, '22

Hi

I have just purchased 250v 100a MPPT charge controller and multiplus II 5000v 48a

And a raspi running venus os.

Is it possible to use ve.can to multiplus ii and then multiplus to pi.

Or do both need to go to the pi?

Ie Mppt ve direct to pi and multiplus ii ve bus to pi

Thanks,

Matt

Multiplus-II multiplus ve.bus

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2022-04-29T19:40:38Z

Matthias Lange - DE answered · Apr 29, 2022 at 07:40 PM

For the MPPT you need a VE.direct to USB cable and for the MultiPlus a MK3 Interface.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.