question

pvittali avatar image
pvittali asked

RS Inverter 48/6000 + Cerbo GX + Pylontech US2000C

Is this a supported configuration ?

The RS Inverter 48/6000 is not in the Pylontech compatibility list.

inverter rs
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Yes it is, and a recent addition as long as all firmware is up to date.

I will update the battery compatibility guide to reflect this - thanks for the reminder.

Note the RS inverters MUST be connected via their VE.Can connection to the GX device, not their VE.Direct connection.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

pvittali avatar image pvittali commented ·
Thank you very much for clarifying this use case.
0 Likes 0 ·
pvittali avatar image
pvittali answered ·

Hi Guy

Did you find some time to update the compatibility guide ? As far as I can see, the webpage has not been updated. Also, where can I find the recommended settings of the Inverter RS when operating with Pylontech (and CerboGX with DVCC activated) ?

Many settings are available via the VictronConnect App. Which ones must be modified ?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

peter-van-zwol avatar image peter-van-zwol commented ·
same question here
0 Likes 0 ·

Related Resources


Inverter RS Product page.

Inverter RS Online Manual.

Inverter RS Datasheet.

Additional resources still need to be added for this topic