Hi all
Just finished setting up my Multiplus 12/3000/120 with the digital multicontrol remote.
When the unit is switched off via the multicontrol all the LEDs on the multicontrol flash rapidly. They are fairly dull however.. The multicontrol works as it should otherwise and the multiplus responds correctly (shutting off when this occurs). It is fine when turned on or 'charger only' and only the appropriate LEDs are lit..
I have tried different cables and updated the Multiplus firmware.
It functions completely normally when I tried unplugging the Multiplus from the Cerbo but then the above issue happens as soon as it plugged in again
Had anyone come across this before?
Thanks!
