question

james-ward avatar image
james-ward asked

Battery Protect Connection

On my attached schematic what port in the BP100 should the load stop from the CL 12/100 go to?
Same question re the BMV, what port from NO to the BP65?


Lastly does it matter which cables go into/out from the inverter switch on this schematic.

screenshot-79.png

installation
screenshot-79.png (72.9 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
steffen-graap avatar image
steffen-graap answered ·

Should be in the instructions:
https://www.victronenergy.de/upload/documents/Manual-BatteryProtect-48V-100-A-EN-NL-FR-SV-DE-PT-ES-IT-TR.pdf


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic