question

joncrowell avatar image
joncrowell asked

MPPT 100/20 load output ok for DC-AC inverter and DC 24 V Motors (10A max draw)

I need to connect an AC inverter to a system with 400W solar (24V) and 100AH battery (24V) to source some DC pumps (24V, 5A max) and a DC-AC inverter supplying 20W @120V AC..


Can these go to the load output of the controller or do I need an external load dump relay and is there a control from the MPPT 100/20 controller? How to connect? Can i use the Victron Battery Protect 12/24-volt 65AMP?


Thanks,

Jon


solarbattery connection
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
kevgermany avatar image
kevgermany answered ·

If you connect to load, you can program a load disconnect voltage, means you don't need a battery protect.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic