question

rbeudel avatar image
rbeudel asked

SMA Inverter disapears from VRM Dashboard after changing to right Phase

Hello,

I am bulding an ESS System with an MPII. My SMA Inverter was found via modbus tcp from Venus OS and put to L1. But that was wrong and I changed it to L3. In this moment, the inverter disapears from VRM Dashboard und is only seen in Advanced.

Is it right so?

Best regards,

Ralf



VRMVenus OS
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @rbeudel,

There is a known issue where single phase PV inverters on phases other than L1 are not visible on the dashboard.

The team is working on it, and it will most likely be as a firmware update to your GX device. Stay up to date with the latest Venus releases until this is resolved.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

rbeudel avatar image
rbeudel answered ·

OK, Thank you

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.