Hi all,
Is it normal my Quattro 8000/200 is only charging at around 160A ? I was expecting 200A as advertised...
My LiFePo4 battery is at 75% soc ; 1200A capacity, and it accept charge at 1C, so 200A charging is not a problem for them.
The grid AC is 64A. (I've also tested from my 8KW generator)...
The wires from the Quattro to the battery are less than 2m long, and are 2x70mm2 (2x positives + 2x negatives).
It's a brand new install, all connections are very clean.
I've removed the shore power limit and the charge limit in the Quattro configuration.
So is it normal that the 200A Victron charger only deliver 160A ?
Or should is there something I should check again ?
Thanks,