This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello, my smart solar is not charging , i have to reset switch to solar panels and unplugg the vebus cable to get the the unit to start again. Fw is 1.59 and it is connected to a Venus gx with the latest fw. This is often happening with heavy loads on the multiplus inverter connected to the system. Someone who have a fix to this?
Can you share some details about your system?
Fixed this problem , faulty vebus cable - replaced this everything ok.
Yes as kim has said much more info is needed.
ie
a wiring diagram may also help
what batteries are being used and if lithium what BMS is being used and how is it connected- what are all the setting in the venusGX
a full list of everything connected.
what are the setting in the mppt. is it on the latest fw
what is the fw version currently on the venus unit
etc etc
Smart solar 150/35 latest fw.
Venus GX latest fw.
Multiplus 1200va not latest fw.
Bmv 702 latest fw.
Maraton agm 630 ah batteri (90x7)
Open up Victron Connect and take a screenshot of your Smartsolar mppt history.
Or perhaps some VRM screenshots?
