I accidently shorted the PV input to the 100/50, hear a pop and controller now does not produce more than 3W. Is there no protection against shorting the PV input as. The 50A thermal breaker between the panels and controller did not trip either.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I accidently shorted the PV input to the 100/50, hear a pop and controller now does not produce more than 3W. Is there no protection against shorting the PV input as. The 50A thermal breaker between the panels and controller did not trip either.
If you shorted the PV terminals the controller should not be damaged. The controller would only “see” a low voltage when the PV was shorted. I would disconnect battery and reboot from start. No reason for the controller to be damaged but shorting the PV.
Thanks, yes did a battery disconnect and reset but still nothing.
Additional resources still need to be added for this topic
24 People are following this question.