question

oerske avatar image
oerske asked

Hello Victron!

I have 4 x 440 watt solar panels (41 volt and 10 amp each)

I have the Multiplus 2 2x120 and I have 2 150/100 charge controllers!

Planning to wire 2 panels in series into 1 charge controller and sane with the other 2 panels into the other charge controller.

What size wiring would I need from panels to charge controller and from charge controller to Multiplus?

Any suggestions about the setup would be appreciated!!

Love the support of this Community!


setup
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

wkirby avatar image wkirby ♦♦ commented ·
What is your battery Voltage?
0 Likes 0 ·
1 Answer
Trevor Bird avatar image
Trevor Bird answered ·

you need to read this booklet.

https://www.victronenergy.com/upload/documents/Wiring-Unlimited-EN.pdf

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic