question

kebler avatar image
kebler asked

I recently added Ruuvi censors. Is there a way to transmit the sensor over NMEA2000?

I have added Ruuvi sensors to the car I running 2.84 software (no issues) I would like to get the sensors to transmit over the NMEA 2000 network. Is there a way to configure this? I am using Garmin Hardware and do not see the additional messages through the antisense reader. Any help would be appreciated!

ruuvi sensors
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

@Kebler

not by default. You would need to install Venus OS large image firmware. It has Signal K pre-installed, which you can use to send those messages to your NMEA 2000 network.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic