I have a 400AH EG4-LiFePower4 battery. Does anyone have the Victron solar charger and battery monitor settings?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a 400AH EG4-LiFePower4 battery. Does anyone have the Victron solar charger and battery monitor settings?
Are these the same batteries? Always refer to the manual if one can be found. They all are downloadable from the site even the warranty, if this is the same battery you are looking at.
The technical part of the manual 3.3.4 table 3.7 states charge voltage range 55.2V~57.6V. 56.0V Recommended.
Spec sheet has all the info you need.
For the battery monitor use the recommended lithium settings as in the videos 1 or 2
Additional resources still need to be added for this topic
Additional resources still need to be added for this topic
Did You Know - How to create a battery profile for non-Victron batteries?
40 People are following this question.
SmartSolar lithium battery storage settings?
24V Lithium Settings and Mid Voltage error
Help with simple Off-Grid Setup 48v EasySolar + LiFePo4
Best Mode for BP-100 in a 24V environment (Semi Trac Battery)
schema aansluiting Orion- Tr Smart , Smart solar MPPT 75/15 , Small BMS Smart battery Protect65