This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi, I am the owner of a 250/100 mppt charge controller and a 48 volt pylontech battery pack. Three photovoltaic strings that develop about 180 volts are connected in parallel to the regulator. How can I integrate a 24 volt dc wind turbine into this system?
Thank you
Andrea
The 24V turbine is quite out of place in a 48V system. I don't know of any kind of boost converters that could acommodate a wind turbine input to step up to a 48V system Voltage.
The Victron MPPT's are buck controllers, meaning that the step the Voltage down from the PV to the battery Voltage.
Sorry, I don't know of a way to do this.
