question

krmarine avatar image
krmarine asked

CCGX and Quattro Power State Memory ?

I’m away from the vessel to check this myself, but just wondered if anyone could advise what to expect with this situation.....


1-DC Power present on Quattro. AC-IN-2 (Shore Power) present on the Quattro. All working Fine.


2-Quattro is switched OFF from the CCGX panel.

3-DC power removed (from both CCGX and Quattro).


What state will the system power back up into the next time DC Power is applied to the Quattro and CCGX ?

-Will the Quattros Inverter come ON ? Or would you need to use the CCGX panel to switch the Quattro back ON ?


-The switch on the front of the Quattro is in the ON position by the way.


Best regards

CCGX Color Control
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul B avatar image
Paul B answered ·

I think you will need to turn it back on at the CCGX

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Pat Davitt avatar image Pat Davitt commented ·

That's the way my system works. The CCGX settings are stored in non-volatile memory. So if you reboot the system, including the CCGX, the inverter/charger may turn on for a mSecond, but then is over ridden by the CCGX setting. You will have to use the CCGX to turn it back on.

Don't you just love smart a** computers :-)

Pat

0 Likes 0 ·