I have a Smartsolar 150/35 connected to a CCGX. I need to replace my 240v charger and thinking about the Skylla I 80a 24 Volt. I run 6x 150amp hour full river AGM in a 24 volt arrangement. Can the GX with DVCC sync the two charges?
Thanks
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a Smartsolar 150/35 connected to a CCGX. I need to replace my 240v charger and thinking about the Skylla I 80a 24 Volt. I run 6x 150amp hour full river AGM in a 24 volt arrangement. Can the GX with DVCC sync the two charges?
Thanks
sorry no, they won't synchronise.
From the DVCC manual:
This mechanism only works for Victron inverter/chargers and Solar chargers. Other chargers, such as Skylla-i’s are not controlled and also their charge current is not taken into account.
https://www.victronenergy.com/media/pg/CCGX/en/dvcc---distributed-voltage-and-current-control.html
48 People are following this question.