question

ksaltman avatar image
ksaltman asked

TSConfig hangs on "Testing Port"

I am trying to configure my 2 100A Buck Boosts using TSConfig. I've installed the USB driver and TSConfig seems to recognize either of the Buck Boosts but when I either select Automatic Port Selection or Manual, TSConfig shows "Testing Port: COM4" and then hangs. Same behavior using the 2nd Buck boosts except it shows COM5.

Only thing I can do at that point is "End Task" as TSConfig is completely hung.

I don't see any way I can configure the Buck boosts.

Any help is appreciated.

Note I'm on the current version of TSConfig, the USB drive and Windows 10 is up to date.

connection issue
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
ksaltman avatar image
ksaltman answered ·

Well I can't tell you why, but with a number of reboots of the buck-boosts I was able to get TSConfig connected and send the settings I need.

From my point of view I'd say this is solved for me.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic