question

juergen225 avatar image
juergen225 asked

Charge Peak Power Pack PPP-40 with Orion-TR Smart 12/12-30 via high-current output

The Orion delivers an output current of 30 A.
The PPP manual gives different values for the maximum charging current (40 A and 20 A): What maximum charging current is now permanently permitted?
Do I risk damaging/destroying the PPP with a charging current of 30 A?
Additional question: can the maximum charging current be set for the Orion?

orion-tr smartPeak Power Pack
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

Hi @Juergen225,

I see the mismatch between the specification sheet and the manual. But then the manual refers to the data sheet again and this clearly says 20A max. charge current.

The charge current for the Orion cannot be changed.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.