MulitPlus and VE.bus Smart

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

Sten asked Mar 22, '19

Is it possible to configure the Multiplus with victronconnect and VE.Bus smart dongle as i can with VEconfigure and mk3 interface?

MultiPlus Quattro Inverter Charger

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2019-03-22T23:31:45Z

Mark answered · Mar 22, 2019 at 11:31 PM

No unfortunately you can only do simple controls like change the mode between 'charger only'/'off'/'on' & setup the input current limits.

Link to manual :

Currently VE Configure with a USB to MK3 adaptor is the only way to fully configure a MultiPlus.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2019-03-23T06:16:00Z

Sten answered · Mar 23, 2019 at 06:16 AM

Thanks. @Mark

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.