Hello
Please I need to wire from remote but I do not how to remove this bridge/link in the I/O conector to install a swich,
How can I do that?
Thanks a lot for yout time
asked
How to wire remote from User I/O in SmartSolar MPPT RS
You can push the orange levers/wings to remove the i/o unit from its position in the RS to work with it.
Use a small scredriver to press in the orange clips. There is basic training on Victron Professional if you want to become more familiar with your new product. The screenshot if from the basic training for Mppt RS. You will need at least 12mm exposed/ stripped back in the wires you insert into the position of the bridge wire already in place.
