question

jkalous avatar image
jkalous asked

3 phase MultiPlus 48/5000 / 70-100 with ESS assistant ignore grid setpoint

Hi

I need advice,

3phase MultiPlus 48/5000 / 70-100, Firmware version 494

ESS assistant,

Cerbo GX Firmware version v2.84 (as well as version v.2.85-1)

The inverter on L3 ignore the grid setpoint (control loop), apparently after updating Cerbo GX.

Before update

before-update.jpg

After update

setpoint-ignore-l3.jpg


Do you have an idea?

Thanks

Josef


ESS
before-update.jpg (137.6 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers