might be an obvious one, but look at the attached photo, where the isolator connects to the lynx distributor.
this is presumably live, if they were to touch it. is there an insulator for covering/protecting against these joint areas?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
might be an obvious one, but look at the attached photo, where the isolator connects to the lynx distributor.
this is presumably live, if they were to touch it. is there an insulator for covering/protecting against these joint areas?
Additional resources still need to be added for this topic
40 People are following this question.