question

pan-mad avatar image
pan-mad asked

Multiplus 2 gx schedule feed-in

My multiplus (24v) ess grid feed in is just about perfect to what i need.

-it feeds in excess from mppt

-it keeps battery charged and only discharges after peak solar production via schedule charging with a low SOC point

-my Multiplus evens puts excess power production from 500w wind turbine on load bypass using relay assistant to a set on 150 ohm resistors if batteries are at 27.2v or higher

now i need to work out how to schedule or activate a “feed-in” or battery “self-consumption“ for a specific time during the day when our immersion heater kicks in … is this possible?

ESS
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers