Hello everyone,
I am building a power system in a Sprinter and would like some advice on an idea I have.
I am installing a second alternator with Wakespeed controller connected to a Victron Lynx System (BMS and Distributor Busbars) controlled by a Cerbo GX. I am installing a 1320ah battery and am trying to figure out how to charge it as fast as possible.
So now to my question, it is a dumb idea to also add a Orion-Tr charger off of the starter battery/chassis alternator to the power-in busbar get additional charging? Or is this going to cause issues with the system as is?
This is pretty similar to what I have but with a 120v x2 3k inverter charger:
https://www.victronenergy.com/upload/documents/MultiPlus-3KW-230VAC-12VDC-600Ah-Li-Lynx-Smart-BMS-&-distributors-Cerbo-GX-touch-generator-MPPT-Extra-Alternator-&-WS500.pdf
Also curious about wiring since the Wakespeed and Orion-Tr both use the BMS ATC connection
Any advice is greatly appreciated