Hello,
I have a Cerbo GX and I'm not much of an expert.
I have connected a GPS antenna via USB.
The coordinates are also displayed.
I am now wondering:
1.)
Is it possible to provide the GPS data via the NMEA2000 bus (via VE.Can to NMEA2000 cable) for plotter, radio etc.?
If so, are there any instructions on what to do?
2.)
On the other hand, is it possible to provide the GPS data from another device via NMEA2000 to VE.Can on the Gerbo GX?
If so, are there any instructions on what to do?
Many thanks in advance for the help.
Regards
Jens
