question

andriesf avatar image
andriesf asked

Skylla-I CAN bus connected with Raspberry

I do have a Raspberry PI and connected a Skylla I with CAN-bus. I see the the device in the device list showing battery voltage and load current. On the main screen I don't see the Skylla-I.

Something wrong in my configuration?

Regards Andries

Raspberry Pi
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

andriesf avatar image andriesf commented ·

My Screenprints

2022-02-14.png

Skylla I not visible

2022-02-14-2.png

Skylla I visible


0 Likes 0 ·
2022-02-14.png (419.3 KiB)
2022-02-14-2.png (431.2 KiB)
2 Answers
wkirby avatar image
wkirby answered ·

That is correct. A battery charger does not show on the page view, but it will be visible in the menu.
There might be a way to make the charger show with "Guimods", but that is something not standard.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

andriesf avatar image andriesf commented ·
Thanks for your reply. I 'll start investigating with Guimods.

Andries

0 Likes 0 ·
Mike Dorsett avatar image
Mike Dorsett answered ·

I'd be interested to know about your hardware setup, and any drivers you had to load on Venus please?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.