This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi All,
I have a question on the smartsolar VE.Can MPPT and the Remote Console.
have 2 sites, both have venus controllers -
site 1 uses 2 x 250/100 VE.Can + 1 x 150/70 VE.Direct
site 2 uses 2 x 150/100 VE.Can + 1 x 150/100 VE Direct
At both sites on the remote console when i look at the Daily History - the VE.Can MPPT will only show the Today, Yesterday data - the VE.Direct MPPT will show Today + 30 days data.
Why is this - is there a setting i have missed.
thanks
Hi Alex,
I do not understand this difference either. I have connected the SmartSolar charger to Cerbo GX using VE.Can first with the same result: only 2 days in history. I found this: https://github.com/victronenergy/venus/wiki/dbus#solar-chargers
/History/* <- Contains values about the last month's history
(Only for VE.Direct solarchargers)
I think, it's something historically grown …
For me it means, I have to buy an additional VE.Direct to USB converter, a VE.Direct cable and maybe an USB-hub. I thought, using VE.Can bus might be a good decision because you can connect all devices using one port, but now I am a little bit disappointed :-(
